Repair Manual MSG 90.6PG Commercial Vehicles, Omnibuses – November 2017
Material no. 1153450_c
3.12 Bowden pull wire for backrest adjustment –
inspection and adjustment
Page 4 of 5
INSPECTION ADJUSTMENT
TABLE OF CONTENTS
3 Adjust the regulating screw (9) at
the left (1) and right Bowden pull
wire (2):
3.1 Loosen the counternut (10) and
adjust the gear segment of the lock
(3) by means of the regulating screw
(9) so that there is no clearance
between the lock (3) and the tooth
sheet (4).
Note:
When releasing the lock (3), the
tooth sheet (4) must freely move
along the lock (3) (without rattling).
3.2 Hold the nut (11) in position and
secure the adjustment of the
regulating screw (9) by means of the
counternut (10).
Note:
Make sure not to distort the Bowden
pull wire (1, 2).
2196
5
4
3
7
6
1,2
13
12
11
10
9
8
12
