![background image](http://html1.mh-extra.com/html/graco/pro-xpc-24y307/pro-xpc-24y307_instructions-manual_2251230054.webp)
Software Update
1. Obtain the software update files. There may be
one or more files required for the update. Put
all files in the root directory of the microSD card.
NOTE: If the microSD card is already in the main
board, this step will need to be performed after
step 4.
2. Switch off the Pro Xpc Auto Controller and
remove power from the system.
3. Remove four screws, then remove the controller
access cover.
4. Find the microSD card slot on the top of the
main board, and insert the microSD card with the
software update.
5. Carefully place the controller access cover onto
the controller box. Do not screw down.
6. Apply power to the Pro Xpc Auto Controller and
press the on button. The screen should blink
and display donE when the reprogramming is
complete.
7. Press any button to return to normal operation.
8. Verify the software version by holding
and
at the same time.
9. Switch off the Pro Xpc Auto Controller and
remove power from the system.
10. If desired, remove the microSD card from the slot,
or replace the microSD card with another. Having
a microSD card in the slot will allow the controller
to store log files. See
for
information about logging.
11. Replace the controller access cover.
12. Screw down the front access cover.
13. Reapply power and switch on the Pro Xpc Auto
Controller.
54
333266D