![background image](http://html1.mh-extra.com/html/graco/pro-xpc-24y307/pro-xpc-24y307_instructions-manual_2251230004.webp)
Warnings
The following warnings are for the setup, use, grounding, maintenance, and repair of this equipment. The
exclamation point symbol alerts you to a general warning and the hazard symbols refer to procedure-specific
risks. When these symbols appear in the body of this manual or on warning labels, refer back to these
Warnings. Product-specific hazard symbols and warnings not covered in this section may appear throughout
the body of this manual where applicable.
WARNING
FIRE AND EXPLOSION HAZARD
Flammable fumes, such as solvent and paint fumes, in work location can ignite or explode.
Paint or solvent flowing through the system can cause static sparking. To help prevent fire or
explosion:
• Electrostatic equipment must be used only by trained, qualified personnel who understand
the requirements of this manual.
• Ground all equipment, personnel, object being sprayed, and conductive objects in or close to
the spray location. Resistance must not exceed 1 megohm. See Grounding instructions.
• Do not use pail liners unless they are conductive and grounded.
• Stop operation immediately if static sparking occurs. Do not use equipment until you identify
and correct the problem.
• Check gun resistance and electrical grounding daily.
• Use and clean equipment only in a well ventilated location.
• Never spray or flush solvent at high pressure.
• Always turn the electrostatics off when flushing, cleaning, or servicing equipment.
• Eliminate all ignition sources; such as pilot lights, cigarettes, portable electric lamps, and
plastic drop cloths (potential static arc).
• Do not plug or unplug power cords or turn lights on or off when flammable fumes are present.
• Keep spray location free of debris, including solvent, rags, and gasoline.
• Keep a working fire extinguisher in the work location.
For solventborne systems only:
• Use cleaning solvents with highest possible flash point when flushing or cleaning equipment.
For waterborne systems only:
• Do not spray or clean with flammable materials. Use water-based materials only.
ELECTRIC SHOCK HAZARD
This equipment must be grounded. Improper grounding, setup, or usage of the system can
cause electric shock.
• Turn off and disconnect power at main switch before disconnecting any cables and before
servicing or installing equipment.
• Connect only to grounded power source.
• All electrical wiring must be done by a qualified electrician and comply with all local codes
and regulations.
4
333266D