![background image](http://html1.mh-extra.com/html/graco/pro-xpc-24y307/pro-xpc-24y307_instructions-manual_2251230041.webp)
Run Screen 2
Run Screen 2 is the secondary screen for an
electrostatic gun. This screen shows the active
Preset, arc detection setpoints, and screen
brightness. Screen brightness is set 0–8, with zero
being Off and 8 being the brightest. NOTE: The
screen will dim automatically after 5 minutes of
inactivity.
Arc detection is a safety feature of the Pro Xpc Auto
Controller. Arc detection is used to detect when
grounded objects are too close to the electrostatic
spraying device. If this occurs, the controller shuts
down high voltage generation instead of creating a
potentially hazardous electrical discharge.
The static arc limit is used to detect a grounded
object that is stationary or slow moving. The dynamic
arc limit is used to detect grounded object that is
fast moving. For both static and dynamic arc limits,
lower values are more sensitive than higher values.
The set points can be changed by pressing the
corresponding
and
keys.
See
,for more information.
NOTE: It is recommended that arc detection settings
not be changed from defaults unless absolutely
necessary. Any desired change must be set
individually for every Preset.
Location
Description
Range
Default
A1
Static Arc Limit
0.1–50 nS
10 nS
A2
Dynamic Arc Limit
0.1–25 nS/s
8.0 nS/s
A3
None
—
—
A4
Display Brightness
0–8
5
A5
Active Preset, error diagnosis, or status
—
—
333266D
41