![background image](http://html1.mh-extra.com/html/graco/pro-xpc-24y307/pro-xpc-24y307_instructions-manual_2251230016.webp)
Connections
1. Connect the ground wire to the ground
connection (G). Connect the other end to a true
earth ground. This connection is required for all
installations.
2. Connect the supplied controller input power cord
to the input power connection (D) and secure with
the connector screw. This connection is required
for all installations. The controller can operate
at 100–240 VAC (50–60 Hz). Connect the leads
to a power source according to local electrical
codes. Pin 3 on the input power connection
is the system interlock. Pin 3 must have line
voltage applied to activate the system interlock.
When the system interlock pin is connected to
line voltage, the controller is enabled and the
system symbol will appear on the controller. See
.
Controller Input Power Connection
Pin No.
Function
Wire Marking
1
Neutral conductor power supply
1
2
Phase (100-240 VAC)
2
3
System Interlock ON/OFF (100-240
VAC) = ON
3
Controller
Power Cord
PE
Grounding PE
Green/Yellow
3. Connect the 7-pin end of the gun power cable
to the gun power cable connection (F) on the
controller. Connect the 4–pin end of the gun
power cable to the spray gun. Follow instructions
in the gun manual. This connection is required
for all installations.
Pre-wired Gun Power Cable Connection
Controller
Gun
Connector (F)
Cable
Cable
Power Supply
Connector
Electrical Schematic for this cable:
16
333266D