76343/4/5 | English, Revision 05 | Date: 23.02.2022
99
HG G-76344XA/ZA 4G LTE 5G – Chapter 13
13.7.2 Network Information
13.8 Input of the Parameters for the Cellular Connection
In the LTE version, both the MC-Config tool (see chapter 4 on page 17) and the web
interface (see chapter 5 on page 34) allow you to set the mobile radio parameters.
Figure 75
Input of the mobile radio parameters via MC-Config (left) or the web interface (right)
Table 72
LTE Network Information in the web interface
Info
Meaning
Interface Mobile (IPv4)
IP-address, net mask and GW of the mobile interface
Interface LAN (IPv4)
IP address, net mask and GW of the LAN interface
Routing
Gateway address of the mobile radio interface
Table 73
Parameters of the mobile connection (part 1 of 2)
Option
Meaning
LTE
Must be enabled to activate the LTE interface.
SIM Card
Enter the parameters of the SIM card here if required.
APN
The access point name is entered under APN. You get this
name from the mobile network provider or from the con
-
figuration of the private campus network, then e.g.
"intranet".
