76343/4/5 | English, Revision 05 | Date: 23.02.2022
31
MC-Config Program – Chapter 4
Figure 23
MC-Config Program: IP search range
1 - 4 allow to choose different methods for defining a scan range:
1.
Freely definable IP range with start and end IP
2.
Definition of an IP range with network address and subnet mask
3.
Definition of an IP range with network address and bit mask
4.
Single IP address entry
Clicking
Add
(6) the selected and edited information will be added to the range (5).
With
Save to File
(7) the information can be saved to a file and with
Load from File
(8) loaded from a file. With the delete key a selected IP range item in (5) can be re
-
moved. After leaving the dialog with
Close
the defined and activated ranges are
scanned.
4.8 Logging Debug Messages
The WLAN clients allow to store events and error situations that occur during oper
-
ation, also see chapter 9 on page 77. What and how this is logged can be set in the
configuration of the WLAN clients. In order to be able correlate logged events with
the time when they occurred it is advantageous if a time server (NTP server) is con
-
figured inside the WLAN client (see section 5.3.7 on page 48).
4.8.1 Configuration of the Debug Parameters
Depending on the problem to be investigated you can change the
intensity
of the de
-
bug messages for specific parts of the radio modem firmware via Configuration –>
Logging. Additionally it is possible to make protocol logs for the WLAN and LAN in
-
terfaces.
5
1
2
3
4
6
7
8
