76343/4/5 | English, Revision 05 | Date: 23.02.2022
21
MC-Config Program – Chapter 4
4.3.3 Arrangement of Columns
The user can design the position of the columns according to his own requirements.
To do this, position the cursor on the column to be moved (in the data area, not at
the header). By holding down the CTRL key + the left mouse button, you can move
the column to the desired position.
12
Ch.
Channel number for the connection of the WLAN client with the AP. The channel
number is defined by the AP.
–
Channels 1 - 14 are in the 2.4 GHz band
–
Channels 36 - 165 are in the 5 GHz band
13
Status
Information on the transfer state of data between the MC-Config program and the
WLAN client. This also includes the status of the logging function for recording the
LAN and/or WLAN data traffic.
14
LAN
Status of the LAN port(s):
15
USB
If a USB memory stick is plugged in this shows its free capacity (in %). If the USB
stick is a Config-Stick (s. chapter 10 on page 85) this is shown as well.
16
Ser1
State of the serial interface. As long as the mouse cursor is positioned above this
column additional information is shown in an overlay.
17
Uptime
Run time of the radio modem since power up or last reset.
18
CPU
CPU workload of the radio modem in [%]
Table 6
MC-Config Program: Information in the list view (part 3 of 3)
Column Name
Function
