76343/4/5 | English, Revision 05 | Date: 23.02.2022
39
Parameter Setting via the Web Interface – Chapter 5
5.1.5 Relay Status Information / IO-Info (Optional)
This section shows the current state of the optional relay and input, as soon as they
are activated.
Table 24
Web interface: Relay Status Information / IO-Info (Optional)
Entry
Note
Relay
Operating mode of the relay.
Current State Current state of the relay, on or off
AUX-Input
(optional)
Table 25
Web interface: Operating modes relay
Modus
Function
Disabled
Function inactive
TCP (UDP)
The relay function opens a TCP (UDP) - Socket
and listens on the configured port.
Internal
The relay is controlled by the digital input.
Serial Trigger
The relay turns on when data is being received
that is sent over the serial interface. Thus, e.g. a
wake-up function can be realized for the device
connected to the radio modem. The relay
switches off again if no data are sent over the
serial interface longer than
timeout
.
Table 26
Web interface: Operating modes AUX input
Modus
Function
Disabled
Function inactive
UDP
The state of the input is propagated to the net
-
work via UDP.
Relay
ON/OFF
If the input is set/unset, the relay is turned on
and off.
Relay toggle
Each activation of the input signal toggles the
relay. (ON
OFF)
