76343/4/5 | English, Revision 05 | Date: 23.02.2022
81
Debug / Logging – Chapter 9
If the current recording file reaches the defined filesize (8 / 32 / 128 MByte) it is
closed and a new file is started. The stored file is then compressed and written as *
.gz file in the file system, the original file is then deleted. Depending on the data com
-
pression rate, data traffic can be logged over a long period of time.
The compressed files can then be downloaded from the Home web page of the ra
-
dio modem. The list of dump files is located at the end of the Home page below the
list of access points. The structure of the file names is explained in Table 56 on page
82.
Figure 65
Debug / Logging: Wireless Dump / Ethernet Dump file list
Additional information is given as to how many bytes and data packets are stored in
the current dump. Also there is information about the number of data packets that
have been discarded (drop count). The file names can be clicked to start a download.
The dump files can be deleted using the function Statistics -> SystemLog -> Reset
System Log.
9.3 Downloading Debug Files with the MC-Config Program
In order to download all log files in one go from the radio modem, you can select the
following command in the MC-Config program via the context menu (right-click ra
-
dio modem in the list) as follows:
Figure 66
Debug / Logging: MC-Config Download Dumps and Log
NOTICE
Excessive stress for the FLASH memory
This type of recording on the interfaces places a heavy load on the FLASH
memory.
Only activate the interface logging for problem diagnosis.
Deactivate interface logging in production use.
