76343/4/5 | English, Revision 05 | Date: 23.02.2022
67
Wireless (WLAN Interface) – Chapter 7
7.3.3 Connect Action
This option is only relevant if the DHCP function is active. Here you can specify what
should happen after the radio modem has connected to an Access Point.
Table 40
Wireless (WLAN Interface): SSID connect action
Parameter
Value
Function
DHCP
No action
Renew
This setting determines what the DHCP client function of the
radio modem should do when a connection to an Access Point
has been successfully established. This action is then per
-
formed at each AP change.
–
No action
does nothing.
–
Renew
may be necessary for appropriately configured
WLAN infrastructures, which then pass on data when a
DHCP action has been performed.
