Gotting HG G-76343, Manual

Page: 34 / 114

Device Description HG G - 76343/4/5 | English, Revision 05 | Date: 23.02.2022
34 Chapter 5 – Parameter Setting via the Web Interface
Use a web browser to establish a connection with the web server of the
HG G
- 76343/4/5. Then a page with information is shown, displaying the current sta -
tus of the WLAN client. This site can be accessed without entering the optional User
and Password combination that might be set. If set, user and password will be re -
quested once when opening any of the other available sites.
5.1 Information Site / Home
The first site that is
visible
contains
general informa -
tion regarding the
current state of the device and about its firmware. It has the following sections.
5.1.1 System Information
This section contains general information about the device:
Figure 27
Web interface: System information
Parameter Setting via the Web Interface
Table 17
Web interface: System Information (part 1 of 2)
Entry Note
Device Name This information can be edited under

Admin (section 5.2
on page 42) and is being displayed in the MC-Config pro -
gram as the device‘s name.
Uptime Shows the time since the HG G - 76343/4/5 was switched
on or resetted the last time.
Realtime clock (UTC) This shows the internal device time. The HG G - 76343/4/5
by default sets the internal time to 2000.01.01 00:00:00
when started.
If a time server is configured (see section 5.3 on page 43),
the HG G
- 76343/4/5 tries to reach it to receive the current
UTC time. If this is successful, the WLAN client changes the
internal time accordingly. The internal time is used as a
timestamp for debug outputs.
Realtime clock (Local
Time)
Firmware 2.09d and
higher Shows the local time calculated from the received UTC
time and the configured time zone (Configuration->Real
-
time Clock->Timezone). Specifics like summer or winter
time can be taken into account via configuration.
5