Device Description HG G-71915ZA | English, Revision 01 | Date: 09.09.2021
32
Chapter 9 – Configuration of the System via the Service Interface
In each of the menu screens, a status field is output at the top (see Table 7). The oth
-
er menu items are activated by entering the preceding number/character, e.g.
for
Reader Config.
Table 7
Meanings of the status outputs (service interface)
Status
Meaning
Level
Sum
Level of the sum signal (also see Figure 16 on page 33).
Diff
Level of the difference signal, sign depending on which half
of the antenna the transponder is located under (also see
Figure 16 on page 33).
Code
Sum
Last decoded transponder code in HEX
Diff
Last decoded transponder code in DEC
Valid
Sum
Valid transponder code detected at the sum signal.
Diff
Valid transponder code detected at the difference signal.
Counter
Sum
Number of incorrect decoding attempts for the sum signal.
Diff
Number of incorrect decoding attempts for the difference
signal.
Zahl
Number of successful code readings from the sum or differ
-
ence signal.
Error
Output of the following error states:
The antenna also indicates the same error condi
-
tions via red flashing codes of the LEDs, see section
14.2 on page 57. Possible causes and remedies are
also described there.
CAN RX counter
Counter for received CAN bus telegrams.
CAN TX Counter
Counter for transmitted CAN bus telegrams.
CAN Status
–
for CAN Standard/Extended
Running, Offline
–
for CANopen®
Operational, Preoperational, Stop,
Offline
Tabelle 8
Status error states
Wertigkeit
Bedeutung
0x001
CAN error
0x002
Parameter error
0x004
USB error
0x008
Internal time base error
i
