GBESS 2.4_4.8KWH system user manual
8
3.1.2 Mounting
1. Don’t install the device in direct sunshine. External heating from exposure to the sun may cause
excessive internal heating. This may result in output power being reduced in order to protect the
internal components from damage.
2. The SolDate 3100/3700TL weights 25kg, the BM024 weights 10 kg. The installation wall must be
vertical and can carry the weight of the devices.
3. Install the GBESS 2.4_4.8KWH in a location where the ambient air temperature is less than 45◦C.
The GBESS 2.4_4.8KWH may reduce its output power if the ambient air temperature exceeds 45◦C
(The cooler the air temperature, the longer the life expectancy of any electronics device).
4. The installation space for GEatom103KHF and battery cabinet, please refer to the device dimension
figure and installation space figure (Figure 6~Figure 8).
5. The system should be installed in a location where is inaccessible to children.
6. The device is designed for indoor installation (IP20).
7. It is recommended to mount the device at eye level to ensure optimum user comfort.
8. Do not install the system on flammable construction materials, in areas close to flammable or
explosive materials.
Figure 6 GEatom103KHF Dimension
PV1
PV2
BUS
GRID
LOAD
DC Switch
ON
OFF
WIFI
TO BAT
CAN
RS485
Ethernet
BUS
TO PV
CAN
BAT
B
A
T
C
H
G
D
IS
C
H
G
