GBESS 2.4_4.8KWH system user manual
14
3)
Fix the expansion bolt A3 into the hole
4)
Fix wall bracket A2 on the wall
5)
Fix screw A4 through bracket A2 to expansion bolt A3, adjust the bracket position and screw up
6)
Align with wall bracket, move SolDate3100/3700TL (A1) in horizontal direction to proper position
7)
Make the hook on wall bracket insert into the hole on SolDate3100/3700TL (A1)
8)
Slowly lower SolDate3100/3700TL (A1) , ensure the device hang on the hook of wall bracket A2
9)
Check if SolDate3100/3700TL (A1) is properly fixed on the wall
3.2.1.2 Mounting BM024 (B1)
1)
Choose a proper position for the bracket B2 on the wall and mark it
2)
Use Φ10 drill template to drill holes on marked position
3)
Fix the expansion bolt B3 in the hole
4)
Fix wall bracket B2 on the wall
5)
Fix screw B4 through wall bracket B2 to expansion bolt B3, adjust the bracket position and screw
up
6)
Align with wall bracket B2, move BM024 (B1) in horizon direction at proper position.
7)
Make the hook on wall bracket B2 insert into the hole on BM024(B1)
8)
Slowly lower BM024(B1), ensure the device hang on the hook of wall bracket B2
9)
Check if BM024(B1) is properly fixed on the wall
Install demonstration:
Figure 16 SolDate3100/3700TL and BM024 Installation Demonstration
3.2.2 Mounting Battery Cabinet
3.2.2.1 Install the battery modules into the battery cabinet:
1)
Side view on the battery cabinet, and confirm that the “DC BREAKER” is turn off:
