PART TWO - INSTALLATION
SECTION 2 - MECHANICAL REQUIREMENTS
PRO-series Model E3 Electrodeless Conductivity Transmitter
2.2 Wall and Pipe
Mounting
Figure 2-1 illustrates how to wall or pipe mount the trans-
mitter using the supplied GLI hardware kit. Determine the
mounting method, and attach the hardware as shown.
1.
Fasten the wall/pipe adapter to the wall or pipe.
2.
Using a blunt tool, open both cable entry knockout
holes in the back cover.
3.
Insert-and-twist the back cover onto the installed
wall/pipe adapter, and tighten its two screws to lock
back cover onto the adapter.
4.
Attach transmitter to back cover using its four captive
screws.
HORIZONTAL
PIPE MOUNT
PRO-SERIES BACK COVER
SCREWS
(CUSTOMER SUPPLIED)
PRO-SERIES
WALL/PIPE ADAPTER
WALL MOUNT
PRO-SERIES
TRANSMITTER
STRAPS OR HOSE CLAMPS
(CUSTOMER SUPPLIED)
VERTICAL
PIPE MOUNT
TWO SCREWS LOCK BACK COVER TO
WALL/PIPE ADAPTER AFTER
COVER IS TWISTED ONTO ADAPTER.
FIGURE 2-1 Wall and Pipe Mounting Details
