PART THREE - OPERATION
SECTION 3 - TRANSMITTER CONFIGURATION
PRO-series Model E3 Electrodeless Conductivity Transmitter
3
S
ECTION
3
☞
3.1 Selecting LANGUAGE
to Operate Transmitter
☞
3.2 Configuring
Sensor Characteristics
SELECT MEASURE
(conductivity,
concentration or TDS)
NOTE:
When the passcode feature is enabled (Section
3.5), you must successfully enter the passcode
before attempting to enter a configuration setting.
The transmitter is normally equipped to display screens in
English and Spanish (Español). However, another language
such as French (Français), German (Deutsche), etc. may be
substituted for Spanish. The transmitter is factory-set for
English. To select the other language:
1.
Press
MENU key
to display a “MAIN MENU” screen.
If the
screen is not showing, use
Ø
Ø
or
×
×
key
to display it.
2.
Press
ENTER key
to display
.
3.
Press
Ø
Ø
key
until
screen appears.
4.
Press
ENTER key
to display
. Use
Ø
Ø
or
×
×
key
to select a language, and press
ENTER
key
to enter it.
NOTE:
After a language is selected and entered, all
screens are displayed in that language.
The transmitter must be configured to define the character-
istics of the sensor including its temperature element type
and “T” factor, and other related items such as selecting the
measurement and its format, temperature compensation,
input signal filtering, etc.
1.
With the
screen displayed, press
Ø
Ø
key
once to display
.
TRANSMITTER CONFIGURATION
