GIMA SpA
DIATERMO MB250 – DIATERMO MB400
MA303IGBa-19-03-2007 Manuale
d’Istruzioni / Instruction’s Manual
49
7.11.2
P
OWER
S
UPPLY
M
ODULE OF THE
E
QUIPMENT AND
V
OLTAGE
S
ELECTOR
Power supply module is the connection point of mains voltage feeding to the unit. This module is provided with line fuses and
the voltage selector.
WARNING:
before switch on the unit, operator has to verify that requested mains voltage corresponds to the voltage available
from the electrical net. (see chap. INSTALLATION).
7.11.3
P
OWER
O
N
-O
FF
M
ECHANICAL
S
WITCH
The POWER ON/OFF mechanical switch is used to control power to the equipment. To power the equipment, press the switch
in the direction of the 1 ( i.e. left part). When the equipment is powered, the light inside the power on-off mechanical switch
and the READY red Led on the right side of the front panel will illuminate. Pressing the switch in the 0 direction will cut
power to the equipment, this operation allows it to be used as a emergency stop switch, in the event of any fault. When the
equipment is powered can be switched-on by the mains electronic switch located on the front panel.
