MDE-4902E Encore® 700 S Start-up and Service Manual · February 2018
Page C-1
Encore 700 S Start-up Checklist
Appendix C: Encore 700 S Start-up Checklist
Diagnostics Mode
Program CRIND Mode and CRIND IDs.
Ensure that all CRIND keys function correctly (including softkeys and auxiliary
keypad).
Set the audio level.
Set the personality screen.
Set the unit IP addresses, if non-default values.
Enable any options present on the CRIND.
Run System Health Report (press
Clear
and swipe the CRIND diagnostic card,
verify the settings, and ensure that the pump and door node versions are displayed).
Verify the cash acceptor alarm switches and activate door alarms.
Test video/audio (if customers have an Applause Media System).
Visual Checks and Transactions
Ensure that no wires are trapped in hinges, gaskets, or visible from the exterior of the
pump.
Perform a CRIND transaction (both credit and debit).
Ensure that the Applause Media is present during a transaction.
Ensure that the CRIND LEDs are functioning correctly.
Ensure that the CPE/LRE (turtle) is powered up and operational (if applicable for
Applause Media System).
Verify that the ADA functions correctly (if present).
Verify that the auxiliary keypad functions properly.
Verify proper communication with the POS.
Ensure that the CRIND prompting on the display, graphic quality, Applause Media
System content are present (if applicable).
• Press
Enter
after each character (for example, for CRIND ID 10, press
1
>
Enter
,
0
>
Enter
, and
Enter
).
•
If the card reader is not responding, close the main doors to eliminate any outside
light intrusion
.
IMPORTANT INFORMATION
