Gigaset SE366 User Manual Download Page 105 | Manualshive

Page: 105 / 124

background image

105

Gigaset SE366 WLAN / englisch / A31008-M1063-R101-4x-7619 / customer_care.fm / 13.11.2008

Sc

hablone 200

4_12

_27

Open Source Software

The Gigaset SE366 WLAN contains, among other things, Open Source Software, which
is licensed under the GNU General Public License and the GNU Lesser General Public
License. This Open Source Software was developed by third parties and is protected by
copyright. The license texts in the original English version are provided on the next
pages.
The software is made available free of charge. You are entitled to use this Open Source
Software as foreseen in the above-mentioned license conditions. In the event of
conflicts between these license conditions and the Gigaset Communications GmbH
license conditions for the software, the above-mentioned license conditions shall
prevail with respect to the Open Source Software.
The GNU General Public License (GPL) is supplied with this product. In addition, you can
download the license conditions from the Internet.

u

You will find the GPL on the Internet at:
http://www.gnu.org/copyleft/gpl.html

u

The source text including copyright notices of the Open Source Software can be
found on the Internet at:
http://www.gigaset.com/developer

If not already supplied with the product, you can request the source text including cop-
yright notices from Gigaset Communications GmbH by paying a fee to cover the physical
act of transferring the copy. Requests can be submitted by e-mail or fax to the address
or fax number below within three years of purchase of this product, indicating the pre-
cise device type as well as the version number of the installed device software.

Gigaset Communications GmbH provides no warranty for the Open Source Software
contained in this product if used in any manner other than the program execution
intended by Gigaset Communications GmbH. The GNU General Public License defines
the warranty for defects, if any, from the author or other licensors of the Open Source
Software.
Gigaset Communications GmbH specifically disclaims any warranties for defects against
it if a product defect is or could have been caused by altering any Open Source Software
program or the product's configuration. In addition, you have no warranty claims
against Gigaset Communications GmbH in the event that the Open Source Software
infringes the intellectual property rights of a third party.
Technical support shall only be provided by Gigaset Communications GmbH for the soft-
ware including the Open Source Software portion contained within, if this software has
not been modified.

Kleinteileversand Bocholt

E-Mail:

[email protected]

Fax:

+ 49 2871 / 91 30 29

«
...
103
104
105
106
107
...
»

Summary of Contents for SE366





























































































































Reviews:

No comments

Related manuals for SE366

Brand: D-Link Pages: 29

DGS-3700 Series

Brand: D-Link Pages: 292

Brand: D-Link Pages: 140

DGS-1224T - Web Smart Switch

Brand: D-Link Pages: 61

DI-LB604 - Load Balancing Router

Brand: D-Link Pages: 14

Brand: D-Link Pages: 2

Brand: D-Link Pages: 45

Brand: D-Link Pages: 218

DES-3528 - xStack Switch - Stackable

Brand: D-Link Pages: 322

DIR-130 - Broadband VPN Router

Brand: D-Link Pages: 10

DIR-130 - Broadband VPN Router

Brand: D-Link Pages: 4

DIR-130 - Broadband VPN Router

Brand: D-Link Pages: 13

Brand: D-Link Pages: 13

DI-804HV - Express ENwork Router

Brand: D-Link Pages: 19

Brand: D-Link Pages: 12

Brand: D-Link Pages: 8

Brand: D-Link Pages: 16

Brand: D-Link Pages: 7

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands