59
Configuring the Advanced Settings
Gigaset SE366 WLAN / englisch / A31008-M1063-R101-4x-7619 / configure_router.fm / 13.11.2008
Sc
hablone 200
4_12
_27
ì
Description
: Enter a description to help you identify different entries.
ì
Select the option in the
Enabled
column.
ì
Click the
Delete
button to delete an entry. Click the
Add
button to add a new entry.
ì
Click
OK
to apply the settings.
Port Forwarding
If you configure Port Forwarding, the Gigaset SE366 WLAN outwardly assumes the role
of the server. It receives requests from remote users under its public IP address and auto-
matically redirects them to local PCs. The private IP addresses of the servers on the local
network remain protected.
Internet services are addressed via defined port numbers. The Gigaset SE366 WLAN
needs a mapping table of the port numbers to redirect the service requests to the server
that actually provides the service. For this, Port Forwarding has to be configured.
ì
To set up port forwarding for a service, select
Port Forwarding
in the
Address
Translation (NAT)
menu.
ì
Select the required application from the
Predefined applications
list.
ì
Click the
Add
button. The data for the required service is entered on the screen.
ì
Select the option in the
Enabled
column.
If the application you require is not in the list, you must enter the relevant data on the
screen manually:
ì
Select the protocol for the service you are providing from the
Protocol
list.
ì
Under
Public port
, enter the port number of the service you are providing.
ì
In the
Local port
field, enter the internal port number to which service requests are
to be forwarded.
Note:
You can enter a single port number or a port block consisting of two port numbers
separated by a hyphen, e.g.
80
or
90-140
.
