Gigaset SE366 User Manual Download Page 78

Page: 78 / 124

Administration and status information

Gigaset SE366 WLAN / englisch / A31008-M1063-R101-4x-7619 / admin_router.fm / 13.11.2008

hablone 200

4_12

_27

Regional Options

To operate your Gigaset SE366 WLAN you can select the location, time zone and the for-
mat for entering the date and time, as well as configure the application for a time server
for Internet time.

In the

Advanced Settings

–

Administration

menu, select the entry

Regional

Options

Select the country in which you are currently located from the list. You can set the
clock to change automatically to summer time and/or to the

Time zone

as you wish.

Select the required option and/or select the

Time zone

for your location.

Select the required format for entering the date and time from the

Date format

and

Time format

lists respectively.

Summary of Contents for SE366





























































































































Search results

Summary of Contents for SE366

Reviews:

Related manuals for SE366

Brands by name

Popular brands

Gigaset SE366, User Manual

Search results

Summary of Contents for SE366

Reviews:

Related manuals for SE366

Brands by name

Popular brands