Gigaset SE366 User Manual Download Page 98 | Manualshive

Page: 98 / 124

background image

98

Appendix

Gigaset SE366 WLAN / englisch / A31008-M1063-R101-4x-7619 / appendix.fm / 13.11.2008

Sc

hablone 200

4_12

_27

The Gigaset SE366 WLAN or
other PCs cannot be reached
by a PC in the connected
LAN with a

ping

command.

ì

Make sure that TCP/IP has been installed and con-
figured on all the PCs on the local network.

ì

Check that the IP addresses have been correctly
configured. In most cases you can use the DHCP
function of the Gigaset SE366 WLAN to assign
dynamic addresses to the PCs in the LAN. In this
case, you must configure the TCP/IP settings of
all the PCs so that they obtain their IP address
automatically.
If you configure the IP addresses in the LAN manu-
ally, remember to use subnet mask 255.255.255.x.
This means that the first three parts of the IP
address on each PC and the Gigaset SE366 WLAN
must be identical. The device must also be config-
ured as DNS server.

No connection to the
Gigaset SE366 WLAN's
configuration interface.

ì

Use the

ping

command to check whether you can

establish a network connection to the Gigaset
SE366 WLAN.

ì

Check the network cable between the PC you want
to use to manage the device and the Gigaset SE366
WLAN.

ì

If the PC you want to use is in the router's local net-
work, make sure that you are using the correct
IP address administration (see above).

ì

If the PC you want to use is not in the router's local
network, it must be authorised via Remote Man-
agement.

Password forgotten or lost

ì

Reset the Gigaset SE366 WLAN (see page 21).

Warning

: Please bear in mind that this will return

all

the configuration settings to the factory settings.

You cannot access a
resource (drive or printer)
on another PC.

ì

Make sure that TCP/IP has been installed and con-
figured on all the PCs on the local network and that
the PCs all belong to the same workgroup.

ì

Check whether the resource has been released on
the PC in question and whether you have the nec-
essary access rights.

ì

Printing: Check whether the printer has been set up
as a network printer.

Symptom

Possible cause and remedial actions

«
...
96
97
98
99
100
...
»

Summary of Contents for SE366





























































































































Reviews:

No comments

Related manuals for SE366

3C13886 - Router OC-3 ATM SML Flexible Interface...

Brand: 3Com Pages: 171

OfficeConnect WX2200

Brand: 3Com Pages: 204

PG-FLEX RT FRL-752

Brand: PairGain Pages: 6

PowerBeam AC Gen2

Brand: Ubiquiti Pages: 22

Brand: SAGEMCOM Pages: 75

Brand: Eaton Pages: 14

AirStation WZR-1166DHP

Brand: Buffalo Pages: 2

Brand: Zhone Pages: 2

Brand: National Instruments Pages: 26

Brand: Raven Pages: 33

XC-16CH-NVR-4TB

Brand: Xyclop Pages: 19

Brand: Patton electronics Pages: 8

Brand: LevelOne Pages: 49

Brand: Alcatel-Lucent Pages: 12

Brand: Amphenol Pages: 43

Brand: Xinje Pages: 76

Brand: Juniper Pages: 6

Brand: Flexwatch Pages: 13

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands