Gigaset SE366 User Manual Download Page 55

Page: 55 / 124

Configuring the Advanced Settings

Gigaset SE366 WLAN / englisch / A31008-M1063-R101-4x-7619 / configure_router.fm / 13.11.2008

hablone 200

4_12

_27

– In

Filtering mode

, define whether the services you select are to be allowed or

blocked.

– Select the

Services

you wish to allow or block.

Select the

Protocol

and enter the appropriate

Port

(a single port number, several

individual port numbers separated by commas, port blocks consisting of two port

numbers separated by a hyphen, or any combination of these, e.g.

80,90-

140,180

). The displayed

Description

helps you to identify different services.

– Activate the

Filter

option to use the service concerned for the service filter.

– You can also select services from the

Predefined applications

list.

– Click

Delete

to delete an entry. Click

Add

to create a new entry with the entered

data or for the selected predefined application.

Click

to apply the settings.

Summary of Contents for SE366





























































































































Search results

Summary of Contents for SE366

Reviews:

Related manuals for SE366

Brands by name

Popular brands

Gigaset SE366, User Manual

Search results

Summary of Contents for SE366

Reviews:

Related manuals for SE366

Brands by name

Popular brands