Gigaset SE366 User Manual Download Page 31 | Manualshive

Page: 31 / 124

background image

31

Basic Setup Wizard

Gigaset SE366 WLAN / englisch / A31008-M1063-R101-4x-7619 / configure_router.fm / 13.11.2008

Sc

hablone 200

4_12

_27

Basic Setup Wizard

The Basic Setup Wizard guides you step by step through the general configuration of the
Gigaset SE366 WLAN. This includes settings for your region and for your Internet access.
Connection to the

is established via the Gigaset SE366 WLAN for all PCs con-

nected to it. You will need your

Internet Provider's

access data for configuration. You

should therefore have this data to hand.

During initial configuration, the start screen of the

Basic Setup Wizard

is displayed

automatically.

ì

If you want to execute the Basic Setup Wizard again after the initial configuration,
select the

Basic Setup Wizard

entry on the start screen to start configuration.

ì

Click

Next >

.

Regional Options

On this screen you select your present location for the regional settings.

ì

Select the country in which you are currently located from the list. You can decide
to have the clock change automatically to summer time and/or to the time zone as
you wish.

ì

Select the required option and/or select the time zone for your location.

ì

Click

Next >

.

Note:

The Basic Setup Wizard will reconfigure your Internet settings if you have already set
them. This does not affect the WLAN and LAN settings.
The access data is stored in the Gigaset SE366 WLAN during configuration. Before
passing the device on to somebody else or having your dealer replace it, you should
first restore the configuration to the factory settings (see page 83). If you do not,
unauthorised persons will be able to use your Internet access data at your expense.

«
...
29
30
31
32
33
...
»

Summary of Contents for SE366





























































































































Reviews:

No comments

Related manuals for SE366

Brand: N-Tron Pages: 101

Brand: Makita Pages: 2

Brand: Magnat Audio Pages: 2

Express5800/E120d-M

Brand: NEC Pages: 2

3CR860-95 - OfficeConnect Secure Router

Brand: 3Com Pages: 2

Brand: 3Com Pages: 26

Netlink FRX4000

Brand: Cabletron Systems Pages: 8

Brand: Cabletron Systems Pages: 4

MMAC-Plus 9F106-02

Brand: Cabletron Systems Pages: 7

Brand: National Instruments Pages: 34

Brand: Ubiquiti Pages: 3

Brand: Netopia Pages: 38

Brand: Vivotek Pages: 170

Brand: C-Data Pages: 26

Marconi OMS 1200

Brand: Ericsson Pages: 136

SUPERLOADER DLT MAGAZINE

Brand: Tandberg Data Pages: 6

WGR614 - Wireless-G Router Wireless

Brand: NETGEAR Pages: 116

Brand: LevelOne Pages: 3

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands