Gigaset SE366 User Manual Download Page 45 | Manualshive

Page: 45 / 124

background image

45

Configuring the Advanced Settings

Gigaset SE366 WLAN / englisch / A31008-M1063-R101-4x-7619 / configure_router.fm / 13.11.2008

Sc

hablone 200

4_12

_27

Configuring the Internet connection

If you have configured your Gigaset SE366 WLAN using the two wizards, you will already
have configured the

connection (Internet access). You can check or change these

settings in the

Internet

menu.

This menu also offers you a wide range of options for security settings and for limiting
access to the Internet as well as for providing your own services on the Internet.

Internet

On the

Internet

screen you can grant or block access to the Internet over your Gigaset

SE366 WLAN.

Internet Connection

You can set up or change the configuration of your Internet connection on this screen.
Any settings you make here must coincide with the features your Internet provider
makes available to you. Incorrect data can lead to problems with your Internet
connection.

ì

If you wish to set up or change the settings for the Internet connection, select

Internet Connection

in the

Advanced Settings

–

Internet

menu.

«
...
43
44
45
46
47
...
»

Summary of Contents for SE366





























































































































Reviews:

No comments

Related manuals for SE366

TokenLink 3C359B

Brand: 3Com Pages: 4

TokenLink 3C359B

Brand: 3Com Pages: 8

TokenLink 3C339

Brand: 3Com Pages: 2

EtherLink 3C985B-SX

Brand: 3Com Pages: 44

Brand: 3Com Pages: 88

Brand: 3Com Pages: 2

Brand: 3Com Pages: 111

TokenLink 3C359

Brand: 3Com Pages: 4

Brand: 3Com Pages: 74

Brand: 3Com Pages: 6

Brand: Cambium Networks Pages: 29

Brand: T&D Pages: 122

Brand: Danfoss Pages: 61

Brand: H3C Pages: 26

ICS-G7748A Series

Brand: Moxa Technologies Pages: 10

Brand: ZyXEL Communications Pages: 125

Brand: E-TOP Pages: 24

Brand: Intellinet Pages: 12

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands