99
Creating/managing access profiles
Gigaset SL75 WLAN / en / A31008-M700-B112-1-7619 / web_server.fm / 24.4.06
Ve
rs
ion05.
08.2
005
Making/changing SIP settings
¤
Open the
SIP
Web page (page 96).
¤
Make the SIP settings (page 94).
¤
Click on
Apply
.
Making/changing additional SIP
settings
For an example of additional SIP settings,
¤
Open the
SIP advanced
Web page
¤
If your SIP provider supports a
Message
Waiting Server
, enter the IP address
(
Enter IP-Address
option activated) or
the computer name (
Enter Name
option
activated) and the
Message Waiting Port
.
¤
If necessary, enter the IP address (
Enter
IP-Address
option active) or the compu-
ter name (
Enter Name
option active) and
the STUN server port in
STUN-Server
/
STUN-Port
.
A STUN server (
S
imple
T
ransversal of
U
DP over
N
AT) is used as an alternative
to the outbound proxy server in order
to bypass the NAT or the firewall at the
access point/WLAN routers. STUN serv-
ers cannot be used with symmetric
NATs.
¤
In the
Local SIP Port
and
RTP Base Port
fields, enter the port numbers via
which your handset sends and receives
signalling or voice data.
¤
In
Session Timer (in sec.)
, enter the time
interval at which the handset should
send a request to the SIP server to
establish a session. The recommended
interval is 3600 seconds.
¤
In
Registration Timer (in sec.)
, enter the
time interval at which the handset
should repeat registration with the SIP
server or registrar. The recommended
interval is 3600 seconds.
¤
Click on
Apply
.
Figure 4 Additional SIP settings (example)
Note:
You should only change the additional SIP set-
tings if you have the appropriate information
from your SIP provider.