Gigaset Gigaset SL75 WLAN User Manual Download Page 101

Page: 101 / 152

Creating/managing access profiles

Gigaset SL75 WLAN / en / A31008-M700-B112-1-7619 / web_server.fm / 24.4.06

ion05.

08.2

005

Open the

IP Routing

Web page

(page 96).

If relevant, enter IP addresses in the

Route 1

Mask 1

Gateway 1

Route 2

Mask 2

and

Gateway 2

fields.

Click on

Apply

Making/editing WLAN settings

Open the

WLAN

Web page (page 96).

Search for available SSIDs and select

available SSID (page 92) or enter name

in the

Network Name (SSID)

field.

You can also make the following WLAN

settings.

Open the

Channel

list and select chan-

nel. Which channels are offered

depends on the configured regulatory

domain (page 85).

Open the

Output Power (in %)

list and

select the transmission power.

Open the

Transfer Mode

list and select

Mixed Mode

only 802.11b

. If IEEE

802.11g is set as a fixed value at the

access point or WLAN router for the

transfer mode, you must set

Mixed Mode

here.

Open the

Transmission Rate

list and

select

Auto

or a fixed value. The trans-

mission rate is measured in data units

per unit of time (Mbit/s). The

Transmis-

sion Rate

depends on the selected

Transfer Mode

. The possible transmis-

sion rates for the set

Transfer Mode

are

shown in the list.

In the

Fragmentation Threshold

field,

specify the size at which voice packets

are to be fragmented.

In the

RTS/CTS Threshold

field, specify

the minimum packet size (in bytes), for

which an RTS (Request To Send) should

be sent.

If, to improve the signal strength, your

WLAN includes several access points

with the same SSID, specify the mini-

mum value for the access point signal

strength in the

Roaming Threshold

field.

If the value is undershot, the handset

searches for an access point with a bet-

ter connection quality and establishes a

connection to this access point.

For

Preamble Type

, click on the

Long

Short

option. Note that the IEEE 802.11

standards demand preamble type

Long

Click on

Apply

Setting up encryption and

authentication in the WLAN

Open the

WLAN Security

Web page

(page 96).

Setting up an access profile without

encryption and authentication

Check that

None

is selected in both lists

(default setting).

Click on

Apply

Setting up encryption with WEP, WPA or

WPA PSK

Set up encryption (page 93).

If relevant, set up authentication with

802.1x (page 93).

Click on

Apply

Notes:

–

Only change the default settings if you

know that this is necessary.

– For more information on the following

parameters, see the Online Help for the

Web configurator.

Note:

The handset must use the same channel as the

access point, as otherwise it cannot establish

radio contact.

Summary of Contents for Gigaset SL75 WLAN

























































































































































Search results

Summary of Contents for Gigaset SL75 WLAN

Reviews:

Related manuals for Gigaset SL75 WLAN

Brands by name

Popular brands

Gigaset Gigaset SL75 WLAN, User Manual

Search results

Summary of Contents for Gigaset SL75 WLAN

Reviews:

Related manuals for Gigaset SL75 WLAN

Brands by name

Popular brands