Gigaset Gigaset SL75 WLAN User Manual Download Page 31

Page: 31 / 152

Operating the handset

Gigaset SL75 WLAN / en / A31008-M700-B112-1-7619 / telephony.fm / 24.4.06

ion05.

08.2

005

Switching between earpiece and

handsfree mode

Press the handsfree key.

Switch handsfree on and off during a call.
If you wish to place the handset in the

charger during a call:

Press and hold the handsfree key

while placing the handset in the base

station. If the

key does not light

up, press the key again

briefly

For how to adjust the loudspeaker vol-

ume, see page 69 and page 81.

Adjusting the volume while in

handsfree mode

Requirement

: Handsfree talking is acti-

vated.

Press the control key.

Set the volume.

Muting

You can deactivate your handset's micro-

phone during a call. The other party hears

a wait melody.

§Ext.Call§

Press the display key to mute

the handset.

”

Press the display key to reacti-

vate the microphone.

Operating the handset

Switching the handset on/off

Activating the handset

Press the end call key

Deactivating the handset

Press and

hold

the end call key

idle status.

You will hear the confirmation tone.

Activating/deactivating the
keypad lock

Press and

hold

the hash key.

You will hear the confirmation tone.

The

icon appears in the display when

the keypad lock is activated.

The keypad lock deactivates automatically

when you receive a call and activates

again after the call.

Note:

After activating the handset, it takes 30 to 60

seconds until the handset is ready for use

(booted up). The time required depends,

amongst other things, on the time taken to log

into in the WLAN network and to register on

the SIP server.

Note:

If you place the deactivated handset in the

charging cradle it does

not

automatically

switch on.

Caution!

With the keypad lock activated, you may

not

be able to dial any emergency numbers,

including those provided by your SIP provider.

Note:

The handset displays an advisory message if

you press a key by accident while the keypad

lock is on. To deactivate the keypad lock, press

and hold

the hash key

Summary of Contents for Gigaset SL75 WLAN

























































































































































Search results

Summary of Contents for Gigaset SL75 WLAN

Reviews:

Related manuals for Gigaset SL75 WLAN

Brands by name

Popular brands

Gigaset Gigaset SL75 WLAN, User Manual

Search results

Summary of Contents for Gigaset SL75 WLAN

Reviews:

Related manuals for Gigaset SL75 WLAN

Brands by name

Popular brands