Remote Operation
Publication 31231, Rev. J, October 2003
3-69
TR
Syntax:
TR
n
Example:
TR 2
! Sets the current sweep trigger to immediate
Description:
Sets the trigger condition for the current sweep as specified by the value
n
:
n = 0
Sets the trigger condition for the current sweep to
Trigger In BNC
.
This will stop the current sweep until the Trigger In BNC is pulsed, at
which time the sweep will go to its starting condition and begin
running (single step will take one step for each trigger). The BNC
trigger is supported for all repeat modes: continuous, single sweep
and single step.
n = 1
Sets the trigger condition for the current sweep to
Softkey or GPIB
.
Setting this trigger type stops the current sweep until the soft key is
pressed or the GPIB GET is received, at which time the sweep will go
to its starting condition and begin running (single step will take one
step for each trigger). The soft key trigger is supported for all repeat
modes: continuous, single sweep and single step.
n = 2
Sets the trigger to
Immediate
- i.e., no trigger condition; the sweep
will begin as soon as it is run. Because single-step repeat mode
requires a trigger, an immediate trigger is not valid for a single-step
sweep.
Summary of Contents for Series 12000A
