Remote Operation
Publication 31231, Rev. J, October 2003
3-45
L2
Syntax:
L2
Example:
N/A
Description:
This command causes the List Mode to run once before stopping after the LR command has
been issued. When the list is exhausted, the frequency remains at the frequency of the last
point. Single Sweep mode supports Immediate, Trigger in BNC and Softkey triggers (See TR
commands).
L4
Syntax:
L4
Example:
N/A
Description:
This command causes the List Mode to take a single step-to the next list point-in response to
a trigger once the LR command has been issued. The first trigger sets the frequency to the
first point in the list being run. Subsequent triggers advance the frequency to the next list
point. When the last point in the list is reached, the next trigger returns the frequency to the
first point in the list. Single Step mode supports Trigger in BNC and Softkey triggers (See TR
commands).
(
NOTE:
The L4 Command modifies Trigger Type setting to Softkey/GPIB
(Command TR1). For Trigger In BNC trigger type, the TR0 Command must follow L4).
LA
Syntax:
LA
n1 n2
Example:
LA 2 6
! Adds a point to list 2 after point number 6
Description:
Adds a point to list
n1
after point number
n2
.
n2 = 1
is the first list
n2 = 1
is the first point in the list. Set n2 = 0 to insert a point at the head of
the list. The frequency, power, dwell and modulation status of the
added point are set to: a) the same values as the point it is inserted
after, or b)
if n2 =
0, to the same values as the point it is inserted before, or c) if the
list is empty, to the instrument’s minimum frequency, 0.00 dBm,
100 ms, modulation off.
NOTE:
The LA command only establishes the point. It is then necessary to send the LF, LL,
LT and LMx commands to set any parameters which need to be changed.
LC
Syntax:
LC
n
Example:
LC 1
! Clears List number 1
Description:
The LC command will clear all the points from the selected list.
LD
Syntax:
LD
n1 n2
Example:
LD 2 6
! Delete point 6 from List number 2
Description:
Deletes point
n2
from list
n1
.
n2
= 1 denotes the first point in the list;
n1
= 1 denotes the first
list. After a point is deleted, the following points in the list are promoted to replace the one
deleted.
Summary of Contents for Series 12000A
