Giga-tronics Series 12000A, Operation Manual

Page: 152 / 238

Series 12000A Microwave Synthesizers
3-36 Publication 31231, Rev J, October 2003
CS Clear Status 3.3.18
√ √
CW d Set CW frequency (HZ,KZ,MZ,GZ) 3.3.5
√ √
CW Set GPIB active parameter 3.3.5
√ √
D1 Set repeat mode for step freq sweep to Continuous 3.3.8
√ √
D2 Set repeat mode for step freq sweep to Single-Sweep 3.3.8
√ √
D4 Set repeat mode for step freq sweep to Single-Step 3.3.8
√ √
DF d Set SPAN parameter (HZ,KZ,MZ,GZ) 3.3.9
√ √
DN Handle pressing step DOWN key 3.3.18
√ √
DU n Specify GPIB screen 3.3.18
√ √
EF Lock knob 3.3.18
√ √
EK Unlock knob 3.3.18
√ √
ERR? Error de-queue (use SCPI mechanism) 3.3.4
√ √
FA d Set Start frequency (HZ,KZ,MZ,GZ) 3.3.9
√ √
FA Set active parameter to start frequency 3.3.9
√ √
FB d Set Stop parameter (HZ,KZ,MZ,GZ) 3.3.9
√ √
FB Set active parameter to stop frequency 3.3.9
√ √
FC d Set Sweep time (S,MS,US) 3.3.9
√ √
FC Set active parameter to sweep time 3.3.9
√ √
FD d Set FM deviation (HZ,KZ,MZ,GZ) 3.3.14 N/A
√
FM n Activate/deactivate FM 3.3.14 N/A
√
FR d Set internal FM rate (HZ,KZ,MZ,GZ) 3.3.14 N/A
√
FT n Set FM mode 3.3.14 N/A
√
GA d Set Start frequency (HZ,KZ,MZ,GZ) 3.3.8
√ √
GA Set active parameter to start frequency 3.3.8
√ √
GB d Set Stop frequency (HZ,KZ,MZ,GZ) 3.3.8
√ √
GB Set active parameter to stop frequency 3.3.8
√ √
GC d Set Step size (HZ,KZ,MZ,GZ) 3.3.8
√ √
GC Set active parameter to step size 3.3.8
√ √
GD d Set Dwell time (S,MS,US) 3.3.8
√ √
Table 3-4: 12000A Native Command Set (Continued)
Command Description Section
Model
124XXA
125XXA/
127XXA