Giga-tronics Series 12000A, Operation Manual

Page: 134 / 238

Series 12000A Microwave Synthesizers
3-18 Publication 31231, Rev J, October 2003
LIST:DELete:POINt
Syntax: LIST:DELete:POINt n1 n2
Example: LIST:DELete:POINt 1 3 ! Deletes point 3 of list 1
Description:
This command deletes point n2 from list n1 . After a point is deleted, the following
points in the list are promoted to replace the one deleted ( NOTE: n2 = 1 denotes the
first point in the list).
LIST:DWELl
Syntax: LIST:DWELl < Num_Val >
Example: LIST:DWELI 100 MS ! Set the dwell time for current editing point in the current
list 100 ms
Description:
This command sets the dwell time of the current editing point to d . The default value
is in alternate values.
LIST:DWELl:POINt
Syntax: LIST:DWELI:POINt n
Example: LIST:DWELI:POINt 3 ! Set edit point 3 as the current editing point.
Description:
This command sets the list point n as the current editing list point before modifying
the dwell time. ( NOTE: LIST:DWELI:POINt should execute first to indicate which list
point is going to modify).
LIST:DWELl:POINt?
Syntax: LIST:DWELl:POINt?
Description:
This command returns the currently selected point for editing dwell time.
LIST:FREQuency:POINt
Syntax: LIST:FREQuency:POINt n
Example: LIST:FREQuency:POINt 3 ! Set list point 3 as the current editing point.
Description:
This command sets list point n as the current editing list point before modifying the
frequency.
LIST:FREQuency:POINt?
Syntax: LIST:FREQuency:POINt?
Description:
This command returns the currently selected list point for frequency editing.