79
Unable to display…
Use DLL function failed…
Other messages
Key Read Error
Refer to the “Understanding security issues” section, if necessary, to make sure that the key is
securely connected, as well as installed in the correct port, and then reboot your computer. If
this fails, call Technical Systems Support at 860-644-6971.
Cannot install OMEGA 2.6 on a remote drive
You can only install OMEGA 2.6 on a local drive where the USB security key is located.
Cannot read from drive XX
The CD-Rom drive or the CD may be defective. Try installing from a networked CD-Rom drive.
Gerber recommends at least nnn MB of memory...Do you want to continue?
If you continue without adding the recommended amount of memory, your system will operate
more slowly and you may not be able to output large jobs.
Not enough space on…
Select another drive. Another solution is to note how much space is needed, exit installation,
make room on the hard disk by removing files, and then start the installation again. Also,
consider a Compact or Custom installation. Refer to “Choosing the setup type” for more
information on Compact installations. See “Computer Hardware and Software Requirements”
for more information on page 7.
