Gerber CAT UV, Owner'S Manual

Page: 56 / 179

Chapter 5 56
Printing Jobs on the Gerber CAT | UV
P83173A RevA
7/19/10
Gerber CAT | UV Print Modes
Imperial Metric
Print Modes
PRINT
SPEED
Foot
2
/ Hour
*
Minutes to Print
4 x 8 Foot Board **
PRINT SPEED
Meter
2
/ Hour *
Minutes to Print
3 x 1.5 Meter Board **
635 x 360 DPI
Performance 1 Bi-Directional 408 6 38 7
Performance 1 Uni-Directional 269 8 25 11
635 x 720 DPI
***Performance 2 Bi-Directional 165 13 15 18
Production 1 Bi-Directional 137 16 13 22
Production 1 Uni-Directional 109 19 10 27
Production 2 Bi-Directional 91 23 8 33
Production 2 Uni-Directional 67 31 6 44
1058 x 720 DPI
Quality 1 Bi-Directional 70 34 7 42
Quality 1 Uni-Directional
56
37 5 53
Quality 2 Bi-Directional
39
53 4 76
Quality 2 Uni-Directional 28 75 3 106
*NOTE: Based on Full Table Printing
** NOTE: Based on start of print to end of print /- 10%
***NOTE: Print mode to be released.
Printing a job – Instructional overview
Printing a job is done in a three simple steps: 1) loading the material, 2) sending the job to the
printer from RIP software, and 3) running the job from the printer.
To print a job
1
To print a job, first press the LOAD/UNLOAD key once you have properly cleaned
and positioned the material. The
Loading material
screen displays.
2
Send the job from your RIP software to the printer.
Loading material
Ready - <job name>
0%