Chapter 4
51
Loading Inks and Materials
P83173A RevA
7/19/10
8
The right edge of the material should be approximately ¼
"
(6mm) underneath the right
hold-down which is located at the far right edge of the platen.
Slide the left hold-down so that it is ¼
"
(6mm) over the material to ensure that the
material does note curl or bend during printing.
9
If you are using the winding unit for roll stock, continue with the procedure “Using
the winding unit.”
Left material
hold-down
device
Right material
hold-down
device
