Chapter 6
82
Printer Maintenance
P83173A RevA
7/19/10
End of Day Clean
CAUTION: All 8 heads MUST be cleaned at the end of every print day.
CAUTION: During maintenance procedures, always wait for printer prompts
before lowering the maintenance shelf or opening the head access door. Performing
either of these actions prior to the prompts will cause an emergency stop and
require you to redo maintenance procedures from the beginning.
NOTE: A shortcut for Steps 1-4 below can be performed by first depressing and holding down
the PAUSE key, and then depressing the CLEAN HEADS key at the same time.
1
From the main control panel press the MENU key. The
Status
screen displays.
2
Press the
Y
or
Z
key until the
Maintenance
screen displays.
3
Press ENTER to display the
End of Day Clean
screen.
4
Press ENTER and the gantry will move over the maintenance shelf and will prompt
you to
lower the Maintenance Shelf.
5
Lower the maintenance shelf. The screen now displays
Raise shelf when done.
NOTE: Do not raise shelf until all heads have been swabbed with Daily Maintenance Solution.
Maintenance
Status
End of Day Clean