background image

User Manual  

5

GXDP-300

®

 

2. Unit description

2.3 Accessories

Chin rest

Bite guide

Bite rod 71 mm

Chin support

Partial edentulous bite positioner

Nose support long - for small adults and children
Nose support short - for large and medium adults

Boxes of hygienic barriers for:

- bite guide

- chin rest and chin support

- temple supports

For the partial edentulous bite positioner and the 
nose supports use a piece cut from a temple sup-
port hygienic barrier. 

User Manual  

5

GXDP-300

®

 

2. Unit description

2.3 Accessories

Chin rest

Bite guide

Bite rod 71 mm

Chin support

Partial edentulous bite positioner

Nose support long - for small adults and children
Nose support short - for large and medium adults

Boxes of hygienic barriers for:

- bite guide

- chin rest and chin support

- temple supports

For the partial edentulous bite positioner and the 
nose supports use a piece cut from a temple sup-
port hygienic barrier. 

Reviewed: Westling Lauri 22.06.11 11:27:45
Approved: Weckman Janne 22.06.11 13:46:25
See the PaloDEx Group Oy PDM system to determine the status of this document. Printed out: 05.09.11 15:25:27

D506222

Approved

Summary of Contents for GXDP-300




















































Reviews: