6
User
Manual
3. Taking an Exposure
GXDP-300
®
3. Using the Unit
IMPORTANT NOTE:
If the unit is being used for the fi rst time or if you are
using the unit for the fi rst time, check that it is set up
to your requirements. Refer to the documentation
supplied with the
GxPicture Software Driver
for
more information.
3.1 Preparing the Unit
1.
PC:
Switch on the acquisition PC or network
switch/PC that is connected to the unit.
2. Switch the unit on. The on/off switch is at the
base of the column at the rear.
The unit display will come on and the unit will
carry out a self test. When the Ready light turns
GREEN the unit is ready to take an exposure.
3. Press
the
Return
key to drive the rotating unit
to the patient entry position.
6
User
Manual
3. Taking an Exposure
GXDP-300
®
3. Using the Unit
IMPORTANT NOTE:
If the unit is being used for the fi rst time or if you are
using the unit for the fi rst time, check that it is set up
to your requirements. Refer to the documentation
supplied with the
GxPicture Software Driver
for
more information.
3.1 Preparing the Unit
1.
PC:
Switch on the acquisition PC or network
switch/PC that is connected to the unit.
2. Switch the unit on. The on/off switch is at the
base of the column at the rear.
The unit display will come on and the unit will
carry out a self test. When the Ready light turns
GREEN the unit is ready to take an exposure.
3. Press
the
Return
key to drive the rotating unit
to the patient entry position.
Reviewed: Westling Lauri 22.06.11 11:27:45
Approved: Weckman Janne 22.06.11 13:46:25
See the PaloDEx Group Oy PDM system to determine the status of this document. Printed out: 05.09.11 15:25:27
D506222
Approved