Gendex GXDP-300, User Manual, Page: 15 / 51

GXDP-300 ® 3. Taking an Exposure
User Manual 9
7. Press the Up/Down keys to adjust the height of
the chin rest so it is slightly higher than the pa-
tient’s chin so that the patient will have to stretch
up to place their chin on the chin rest.
8. If the patient is dentate, ask the patient to step
into the unit, grasp the patient handgrips, place
his/her chin on the chin rest and bite the notches
in the bite guide.
If the patient is partially edentulous, ask the pa-
tient to bite the partial edentulous bite positioner.
If the patient is edentulous, ask the patient to
press their chin against the chin support.
9. Press the Lasers key to switch the patient po-
sitioning lasers on. They will remain on for two
minutes.
NOTE:
The patient positioning lasers will automatically
come on when either the
Up or Down key is
pressed.
GXDP-300 ® 3. Taking an Exposure
User Manual 9
7. Press the Up/Down keys to adjust the height of
the chin rest so it is slightly higher than the pa-
tient’s chin so that the patient will have to stretch
up to place their chin on the chin rest.
8. If the patient is dentate, ask the patient to step
into the unit, grasp the patient handgrips, place
his/her chin on the chin rest and bite the notches
in the bite guide.
If the patient is partially edentulous, ask the pa-
tient to bite the partial edentulous bite positioner.
If the patient is edentulous, ask the patient to
press their chin against the chin support.
9. Press the Lasers key to switch the patient po-
sitioning lasers on. They will remain on for two
minutes.
NOTE:
The patient positioning lasers will automatically
come on when either the
Up or Down key is
pressed.
Reviewed: Westling Lauri 22.06.11 11:27:45
Approved: Weckman Janne 22.06.11 13:46:25
See the PaloDEx Group Oy PDM system to determine the status of this document. Printed out: 05.09.11 15:25:27
D506222
Approved