User Manual
25
GXDP-300
®
5. Troubleshooting and Maintenance
5.2 Care and Maintenance
Cleaning and disinfecting the unit
Warning
Switch the unit off before cleaning it.
Surfaces that the patient touches
All surfaces and parts that the patient touches or
comes into contact with must be disinfected after
each patient. Use a disinfectant that is formulated
specifi cally for disinfecting dental equipment and
use the disinfectant in accordance with the manu-
facturer’s instructions.
Unit surfaces
Use a soft cloth dampened with a mild detergent/
disinfectant to clean unit surface. DO NOT use
abrasive cleaning agents or polishes on the unit.
Positioning mirror and laser cover
The positioning mirror is made of glass and the cus-
pid laser cover is made of plastic. Use a soft cloth
dampened with a mild detergent to clean them. DO
NOT use abrasive cleaning agents or polishes on
these parts.
Touch screen control panel
If the surface of the control panel becomes soiled,
clean it with absorbent cotton or other soft cloth.
Remove any drops of liquid from the control panel
surface immediately. Prolonged contact with liquid
may cause the surface of the control panel to dis-
color or spots to appear.
User Manual
25
GXDP-300
®
5. Troubleshooting and Maintenance
5.2 Care and Maintenance
Cleaning and disinfecting the unit
Warning
Switch the unit off before cleaning it.
Surfaces that the patient touches
All surfaces and parts that the patient touches or
comes into contact with must be disinfected after
each patient. Use a disinfectant that is formulated
specifi cally for disinfecting dental equipment and
use the disinfectant in accordance with the manu-
facturer’s instructions.
Unit surfaces
Use a soft cloth dampened with a mild detergent/
disinfectant to clean unit surface. DO NOT use
abrasive cleaning agents or polishes on the unit.
Positioning mirror and laser cover
The positioning mirror is made of glass and the cus-
pid laser cover is made of plastic. Use a soft cloth
dampened with a mild detergent to clean them. DO
NOT use abrasive cleaning agents or polishes on
these parts.
Touch screen control panel
If the surface of the control panel becomes soiled,
clean it with absorbent cotton or other soft cloth.
Remove any drops of liquid from the control panel
surface immediately. Prolonged contact with liquid
may cause the surface of the control panel to dis-
color or spots to appear.
Reviewed: Westling Lauri 22.06.11 11:27:45
Approved: Weckman Janne 22.06.11 13:46:25
See the PaloDEx Group Oy PDM system to determine the status of this document. Printed out: 05.09.11 15:25:27
D506222
Approved
