Gemalto Cinterion EHS6 Command Manual Download Page 2

Page: 2 / 513

Cinterion

EHS6 AT Command Set



EHS6_ATC_V03.001

15/12/3

Confidential / Released

GENERAL NOTE

THE USE OF THE PRODUCT INCLUDING THE SOFTWARE AND DOCUMENTATION (THE "PRODUCT") IS

SUBJECT TO THE RELEASE NOTE PROVIDED TOGETHER WITH PRODUCT. IN ANY EVENT THE PROVI-

SIONS OF THE RELEASE NOTE SHALL PREVAIL. THIS DOCUMENT CONTAINS INFORMATION ON

GEMALTO M2M PRODUCTS. THE SPECIFICATIONS IN THIS DOCUMENT ARE SUBJECT TO CHANGE AT

DISCRETION OF GEMALTO M2M. GEMALTO M2M GMBH GRANTS A NON-EXCLUSIVE RIGHT TO USE

THE PRODUCT. THE RECIPIENT SHALL NOT TRANSFER, COPY, MODIFY, TRANSLATE, REVERSE ENGI-

NEER, CREATE DERIVATIVE WORKS; DISASSEMBLE OR DECOMPILE THE PRODUCT OR OTHERWISE

USE THE PRODUCT EXCEPT AS SPECIFICALLY AUTHORIZED. THE PRODUCT AND THIS DOCUMENT

ARE PROVIDED ON AN "AS IS" BASIS ONLY AND MAY CONTAIN DEFICIENCIES OR INADEQUACIES. TO

THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, GEMALTO M2M GMBH DISCLAIMS ALL WAR-

RANTIES AND LIABILITIES. THE RECIPIENT UNDERTAKES FOR AN UNLIMITED PERIOD OF TIME TO

OBSERVE SECRECY REGARDING ANY INFORMATION AND DATA PROVIDED TO HIM IN THE CONTEXT

OF THE DELIVERY OF THE PRODUCT. THIS GENERAL NOTE SHALL BE GOVERNED AND CONSTRUED

ACCORDING TO GERMAN LAW.

Copyright



Transmittal, reproduction, dissemination and/or editing of this document as well as utilization of its contents and

communication thereof to others without express authorization are prohibited. Offenders will be held liable for

payment of damages. All rights created by patent grant or registration of a utility model or design patent are

reserved.

Trademark Notice



Gemalto, the Gemalto logo, are trademarks and service marks of Gemalto and are registered in certain coun-

tries.



Microsoft and Windows are either registered trademarks or trademarks of Microsoft Corporation in the United

States and/or other countries. All other registered trademarks or trademarks mentioned in this document are

property of their respective owners.

Page 2 of 513



Document Name:

Cinterion

EHS6 AT Command Set

Version:

03.001

Date:

December 3, 2015

DocId:

EHS6_ATC_V03.001

Status

Confidential / Released

Summary of Contents for Cinterion EHS6


































































































































































































































































































































































































































































































































Search results

Summary of Contents for Cinterion EHS6

Reviews:

Related manuals for Cinterion EHS6

Brands by name

Popular brands

Gemalto Cinterion EHS6, Command Manual

Search results

Summary of Contents for Cinterion EHS6

Reviews:

Related manuals for Cinterion EHS6

Brands by name

Popular brands