manualshive.com logo in svg

Gemalto Cinterion EHS6, Command Manual

Share
Download
Gemalto Cinterion EHS6 Command Manual Download Page 287

Cinterion

® 

EHS6 AT Command Set  

11.3 AT+CGATT

EHS6_ATC_V03.001

15/12/3

Confidential / Released

 

Page 287 of 513

11.3

AT+CGATT   GPRS attach or detach

The 

AT+CGATT

 write command is used to attach the MT to, or detach the MT from the Packet Domain service. 

After the command has completed, the MT remains in V.250 command state. If the MT is already in the requested 

state, the command is ignored and the OK response is returned. Any active PDP contexts will be automatically 

deactivated when the attachment state changes to detached. 

The 

AT+CGATT

 read command returns the current Packet Domain service state. 

The 

AT+CGATT

 test command is used for requesting information on the supported Packet Domain service states. 

Syntax

Parameter Description

Indicates the state of Packet Domain attachment. The parameter is global for all interfaces.
0

(P)

Detached

[1]

Attached

Test Command

 

AT+CGATT=?

Response(s)

+CGATT: 

(list of supported 

<state>

s)

OK

Read Command

 

AT+CGATT?

Response(s)

+CGATT: 

<state>

OK

Write Command

 

AT+CGATT=

[

<state>

]

Response(s)

OK

ERROR

+CME ERROR: 

<err>

PIN

Last

Reference(s)

+

-

-

3GPP TS 27.007 

[45]

<state>

(num)

Summary of Contents for Cinterion EHS6


































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands