manualshive.com logo in svg

Gemalto Cinterion EHS6, Command Manual

Gemalto Cinterion EHS6 Command Manual is available for free download from our website. This comprehensive manual provides detailed instructions and valuable information on operating and optimizing the Gemalto Cinterion EHS6 product. Unlock the full potential of your device by accessing the manual at manualshive.com.

Share
Download
background image

Cinterion

® 

EHS6 AT Command Set  

 

EHS6_ATC_V03.001

15/12/3

Confidential / Released

 

Page 226 of 513

Socket service used with UDP protocol

The significant differences between the TCP and UDP protocols imply that UDP sometimes requires particular 

procedures or even specific parameters. Details on how to handle UDP services can be found in extra notes or 

are included in the general parameter descriptions. 

The EHS6 offers two kinds of Socket service with UDP protocol. 
•

UDP Client:

 Intended for connections to a given remote host. In this case the IP address and the UDP port of 

the remote host are set as a fixed parameter in the service profile. The UDP Client can use Transparent Mode 

and Non-Transparent Mode. 

•

Non-Transparent UDP Endpoint:

 IP address and UDP port of the remote hosts are handled in each read 

(

AT^SISR

) and write (

AT^SISW

) request. This enables the host application to communicate with different 

remote hosts. 

See example in Section 

10.15.8

, 

UDP Scenario

. 

Secure connection (TLS)

All services support Transport Layer Security (TLS), except UDP client and Socket Listener. To set TLS simply 

add "s" to the address type, such as socktcps, ftps, https, smtps. For details see 

AT^SISS

 

<srvParmTag>

 

parameter "address". To create customized TLS certificates please refer to 

AT^SJMSEC

 and 

[3]

. The processes 

of switching on/off certificate verification and adding/removing certificates for socktcps, ftps and smtps are same 

as those of https. Please refer to the description for https in 

AT^SJMSEC

 and 

[3]

. The certificates should be 

installed on the FFS, and the boundary is determined by the size of FFS. 

Two design strategies for using Internet Service AT commands - URC mode or polling mode: 

The EHS6 offers two modes of controlling an Internet session opened with 

AT^SISO

. To select the mode that 

best suits the preferences of your application design use the 

AT^SCFG

 command, parameter "Tcp/WithURCs" 

(refer to 

<tcpWithUrc>

). 

• URC mode (delivery default):

The progress of an Internet session is URC driven. The URCs notify the host whether data can be sent or 

received, whether data transfer has completed, whether the service can be closed or whether an error has 

occurred. This mechanism eliminates the need to poll the service until the necessary progress information is 

received.

To enable the URC mode select: 

AT^SCFG

="Tcp/WithURCs",on. 

• Polling mode:

In polling mode, the presentation of URCs related to the Internet Services is disabled. The host is responsible 

to retrieve all the status information needed for controlling the Internet session. This is done by polling, where 

the host application keeps sending the commands 

AT^SISR

, 

AT^SISW

, 

AT^SISI

. 

To enable the polling mode select: 

AT^SCFG

="Tcp/WithURCs",off.

The disabled URCs are the following: "

^SISR

" URC, "

^SISW

" URC and "

^SIS

" URC for parameter 

<urc-

Cause>

=0 (Internet service events), but not for 

<urcCause>

=1 or 2 (needed for Socket listener and always 

enabled). 

Maximum number of profiles defined / used:

 

• Up to 6 connection profiles can be created (with 

AT^SICS

). 

• Up to 10 service profiles can be created (with 

AT^SISS

). 

• A connection profile can be created on one interface and then viewed or changed on all other interfaces. 
• A service profile can be used only on one interface at a time: 

- Service profiles can only be opened on the interface where they have been defined with 

AT^SISS

. 

- Accordingly, on each interface the read commands 

AT^SISO

? and 

AT^SISI

? deliver full status informa-

tion for the service profiles configured / opened on this interface, while service profiles related to other 

interfaces are only listed by 

<srvProfileId>

 and service type name (= 

<srvParmTag>

 value "srv-

Type") without any status parameters. 

- Changes to a service profile are allowed only on the same interface where it was created, trying to change 

it on another interface is denied with "+CME ERROR: invalid index". If queried with the read command 

AT^SISS

? the entire profile is returned on the interface where the service profile was created, while on all 

other interfaces only the service type of the profile is stated. 

Summary of Contents for Cinterion EHS6


































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for Cinterion EHS6

B&R Industries AP1000 User Manual preview
AP1000
Brand: B&R Industries Pages: 89
Abus FUMO50110 Quick Manual preview
FUMO50110
Brand: Abus Pages: 12
CAME TWIN Maintenance Instructions Manual preview
TWIN
Brand: CAME Pages: 98
CAME ZL19N Installation Manual preview
ZL19N
Brand: CAME Pages: 16
CAME RIOED8WS Instructions Manual preview
RIOED8WS
Brand: CAME Pages: 8
Campbell CR10 PROM Replacement Procedure preview
CR10 PROM
Brand: Campbell Pages: 8
ICP DAS USA MDC-700 Series Quick Start preview
MDC-700 Series
Brand: ICP DAS USA Pages: 4
ICP DAS USA I-7080 Quick Start Manual preview
I-7080
Brand: ICP DAS USA Pages: 6
ICP DAS USA EIP-2000 Series Faq preview
EIP-2000 Series
Brand: ICP DAS USA Pages: 19
Jabra LINK 280 - User Manual preview
LINK 280 -
Brand: Jabra Pages: 8
Parker ACR7000 Series Hardware Manual preview
ACR7000 Series
Brand: Parker Pages: 21
Parker AC890PX Series Quick Start Manual preview
AC890PX Series
Brand: Parker Pages: 26
Parallax 700-10016 Manual preview
700-10016
Brand: Parallax Pages: 3
Panasonic KX-A16B Quick Start Manual preview
KX-A16B
Brand: Panasonic Pages: 8
POLA HP49 Handbook preview
HP49
Brand: POLA Pages: 2
Burlington SP697 Installation Instruction preview
SP697
Brand: Burlington Pages: 7
nvent JBS-100-EC Installation Instructions Manual preview
JBS-100-EC
Brand: nvent Pages: 6
Smart Vision BTM-1000 Product Data Sheet preview
BTM-1000
Brand: Smart Vision Pages: 5

Brands by name

Popular brands

Load more brands