Gemalto Cinterion EHS6 Command Manual Download

Page: 135 / 513

Cinterion

EHS6 AT Command Set



7.2 ATD



EHS6_ATC_V03.001

15/12/3

Confidential / Released

Page 135 of 513

7.2

ATD Mobile originated call to specified number

ATD

can be used to set up outgoing voice and data calls. It can also be used to send *# codes for Supplementary

Services and other functions. The termination character ";" shall be added when a voice call is originated.



Using

ATD

during an active call:

• When a user originates a second voice call while there is already an active voice call, the first call will auto-

matically be put on hold.



Syntax



Parameter Description

String of dialing digits and optional V.250 modifiers: 0-9, *, #, +, A, B, C, D and p



The following V.250 modifiers are ignored: ,(comma), T, !, W ,@



DTMF transmission: If the dial string

<n>

contains the call modifier "p" the digits after this call modifier till the

end are handled as DTMF tones (0-9,*,#), which are transmitted at connect state for voice calls. When encoun-

tering the DTMF separator subsequently, the module will insert a pause.

String of GSM modifiers:



I Activates CLIR (disables presentation of own phone number to called party, if no *#31#-code is within the

dial string)



i Deactivates CLIR (enables presentation of own phone number to called party, if no *#31#-code is within the

dial string)



G Activate Closed User Group explicit invocation for this call only.



g Deactivate Closed User Group explicit invocation for this call only.



Exec Command

ATD

<n>

[

<mgsm>

][;]

Response(s)



If successfully connected and non-voice call (ME switches to online data mode):

CONNECT

<text>

If voice call and command input is completed:

If no dialtone (parameter setting

ATX

3 or

ATX

4):

NO DIALTONE

If busy (parameter setting

ATX

3 or

ATX

4):

BUSY

If connection cannot be set up:

NO CARRIER

NO ANSWER

ERROR

+CME ERROR:

<err>



Last

Reference(s)

ITU-T V.250

[16]

<n>

(text)

<mgsm>

(str)

Summary of Contents for Cinterion EHS6


































































































































































































































































































































































































































































































































Search results

Summary of Contents for Cinterion EHS6

Reviews:

Related manuals for Cinterion EHS6

Brands by name

Popular brands

Gemalto Cinterion EHS6, Command Manual

Search results

Summary of Contents for Cinterion EHS6

Reviews:

Related manuals for Cinterion EHS6

Brands by name

Popular brands