gefran 2850T, Use And Installation Manual

Page: 164 / 166

162
13. ANNEXES
80703B_MHW_2850T/3850T_02-2019_ENG
Type Group Variable name Use Description
Boolean System START_ZERO R W Start program ZERO
Boolean System RESET_ n R W
Reset program n. The status switches to READY (STATUS_n = 0)
n can take on values from 1 to 8.
Boolean System RESET_ZERO R W Reset program ZERO
Boolean System PAUSE_ n R W
Pause program n. The status switches to HOLD (STATUS_n = 2)
n can take on values from 1 to 8.
Boolean System END_ n R W
End program n. The status switches to END (STATUS_n = 3)
n can take on values from 1 to 8.
Boolean System SKIP_ n R W
From the HOLD condition, program n passes to the following segment
n can take on values from 1 to 8.
Boolean System WAIT_
n
R
Waiting for the consents before executing the step of program n.
n can take on values from 1 to 8.
Boolean System CH n _ALL_H R
Top range exceeded alarm for channel n in the program in position 1.
n can take on values from 1 to 4.
Boolean System CH n _ALL_H_P p R
Top range exceeded alarm for channel n in the program in position p .
n can take on values from 1 to 4.
p can take on values from 2 to 9.
Boolean System CH n _ALL_L R
Bottom range exceeded alarm for channel n in the program in position
1.
n can take on values from 1 to 4.
Boolean System CH n _ALL_L_P p R
Bottom range exceeded alarm for channel n in the program in position
p .
n can take on values from 1 to 4.
p can take on values from 2 to 9.
Boolean System WAIT_DISABLE_ n R W
Disable waiting for consent in the program step n .
n can take on values from 1 to 8.
Boolean System HBB_ n R
HBB alarm for program n .
n can take on values from 1 to 8.
Boolean System START_ENABLE R W
Indicates the possibility to start the program. You can reset it to prevent
the programs from starting.
Boolean System SUSPEND_n R W
Suspends program n .
n can take on values from 1 to 8. Works like the PAUSE command,
but status is not changed and as soon as the SUSPEND signal is OFF
again, the program automatic restarts.
Boolean System SUSPEND R W Suspends all programs
Boolean System MANUAL_SEL_ n R W
Program n command in manual mode, valid only when the program is
in READY status, i.e. not being executed.
n can take on values from 1 to 8.
Ret
Register
System MANUAL_SPm_n RW Set the manual SP of profile m in program n
String System Program_ n _name R
Program name n .
n
can take on values from 1 to 8.
String System Program_ n _descr R
Program n description
n can take on values from 1 to 8.
String System WORK_NAME_ n R W
Program batch name n .
n can take on values from 1 to 8.
String System TIME_STEP_n R Time missing to the subsequent step of program n
String System TIME_INC_n R Total time from the Program n START
String System POWER_ON R Start text: "Power on".
String System POWER_OFF R Stop text: "Power off".
String System PROGRAM_STOP R Idle program text: "Program ready".
String System PROGRAM_START R Running program text: "Program run".
String System PROGRAM_HOLD R Paused program text: "Program hold".
String System PROGRAM_END R End program text: "Program end".
String System PROGRAM_SKIP R Skip program text: "Program skip".
String System
PROGRAM_STEP_
TIME
R Time until next step for program in 1 st
position.
NB:
The 09 program index corresponds to the TEMPLATE program.
The 10 program index corresponds to the ZERO program.