GE M
EDICAL
S
YSTEMS
PROPRIETARY TO GE
D
IRECTION
2294854-100, R
EVISION
3
LOGIQ™ 9 P
ROPRIETARY
M
ANUAL
8-184
Section 8-50 - Wireless Voice Scan Option
8.) Check your local TV listings of your City (and Cities near you if you are within 60miles) to see
which TV stations in your frequency band are NOT used. Note that some new HDTV stations
are coming on line in these ranges.
9.) Refer to the charts in
of the “Evolution Wireless Custom Frequency Groupings by TV
Channel” and select the chart which matches the combinations of unused TV stations you
have available.
Example:
With an “A” range transmitter, you must check TV stations 22 thru 27. If stations 22,23,25,26 are unused
fequencies you would use the following chart:
10.)Use the arrow buttons to tune to the second frequency in the list.
11.)Push Set to accept that frequency.
12.)Write down the frequency used (i.e. 518.600) ______________________. This will be used
later when we update VPD data for Voice Scan.
NOTE:
If you have multiple LOGIQ™ 9s with wireless Voice Recognition, the other LOGIQ™ 9s must
use different frequencies.
Perform the Receiver Setup on your next LOGIQ™ 9s, this time picking the frequency that is
4
th
in the list.
For the remaining system receive frequency selections, avoid picking additional frequencies at
the ends of the list and leave at least one frequency inbetween each frequency assigned to a
LOGIQ™ 9.
13.)Put the receiver back down on the foam.
14.)Re-install the upper foam if necessary.
15.)Proceed to the transmitter setup.
Figure 8-197 TV Channel Chart Example
