GE H48671KK, Service Manual

Page: 168 / 432

GE H
EALTHCARE
RAFT V
OLUSON
E8 / V
OLUSON
E6
D
IRECTION
KTD102576, R
EVISION
7 DRAFT (A
UGUST
23, 2012) S
ERVICE
M
ANUAL
4-32 Section 4-5 - Backup and Restore Database, Preset Configurations and Images
Section 4-5
Backup and Restore Database, Preset Configurations and Images
1.) Press the
UTILITIES
key on the control panel.
2.) In the “Utilities” menu touch SYSTEM SETUP to invoke the setup desktop on the screen.
3.) On the left side of the screen select BACKUP and then click the SYSTEM CONFIGURATION tab.
The
SYSTEM CONFIGURATION
page is subdivided in 2 main groups:
A.) Image Settings Only
respectively
Small Backup (Scan Settings)
• Section 4-5-1 "Save Image Settings Only / Save Small Backup (Scan Settings)" on page 4-33
• Section 4-5-2 "Load Image Settings Only / Load Small Backup (Scan Settings)" on page 4-34
B.) Full System Configuration
• Section 4-5-3 "Save Full System Configuration (Full Backup)" on page 4-37
• Section 4-5-4 "Load Full System Configuration (Full Backup)" on page 4-39
• Section 4-5-5 "Delete Full System Configuration (Full Backup)" on page 4-41
Settings and/or Full System Configuration can be saved to the following destinations:
• D: partition of internal hard disk
• DVD/CD+R/RW
• Mapped Network Drive, see: Section 3-12-1 "Map Network Drive" on page 3-66
• Any other drive connected to the system (e.g.; USB-Stick or external hard disk drive)
Note:
This function is only available in the Full Backup utility.
For further details review: Section 3-5-13 on page 3-30
CAUTION
!! CAUTION:
It is recommended to
Backup the Full System Configuration
( Section 4-5-3 on page 4-37 ) and the
Image Archive
( Section 4-5-6 on page 4-42 )
once a week.
Figure 4-22 System Setup - Backup - SYSTEM CONFIGURATION page
Image Settings Only
Full System Configuration
Small Backup (Scan Settings)
respectively