GE H48671KK, Service Manual

Page: 106 / 432

GE H
EALTHCARE
RAFT V
OLUSON
E8 / V
OLUSON
E6
D
IRECTION
KTD102576, R
EVISION
7 DRAFT (A
UGUST
23, 2012) S
ERVICE
M
ANUAL
3-40 Section 3-7 - Printer Installation
3-7-3 Printer Installation manually
(cont’d)
13.)Assign a name, decide if printer should be used as default printer and confirm with NEXT.
NOTE: If the “Printer Sharing” window appears, select ‘Do not share this printer‘ and confirm with NEXT .
14.)The “Complete the Add Printer Wizard” window appears on the screen.
15.)Complete the manual Printer Installation with the FINISH button.
NOTE: If the message “The software you are installing for this hardware has not passed Windows ....” appears,
click
CONTINUE ANYWAY .
16.)Close all open windows, close the “System Setup” with SAVE & EXIT and restart the system
(turn off and on the system).
Figure 3-38 Assign name
Figure 3-39 Complete manual Printer Installation
NOTICE
!! NOTICE:
After boot up of the system, verify the correct settings in the printer “Properties”,
see:
Section 3-7-4 "Adjustment of Printer Settings" on page 3-41 .
Afterwards assign the Printer to the remote keys
P1
,
P2
,
P3
and/or
P4
,
see: Section 3-7-5 "Remote Control Selection" on page 3-48 .