GE DPI 610 IS, User Manual

Page: 44 / 68

K249 Issue No. 4
30
Datalog Operations
Datalog is a special application of store mode which enables the calibrator to
either automatically log displays at preset time intervals or to manually log a
display on operation of the
STORE key. Logged data is written to a user specified
file.
To set up a datalog file, proceed as follows.
•
Select a task, other than BASIC . If using ADVANCED , set-up required Source
and Output parameters.
• Use SETUP to select Datalog from the Store Mode Menu (See Page 36).
Auto Log (Timer)
Press STORE and set-up the datalog file parameters as shown below. Use CHANGE
VALUE (F1) followed by cursor keys to set field values. For Auto Log, set-up
TRIGGER field to PERIODIC .
Manual Logging
Enter the file details as shown above and select KEYPRESS for TRIGGER field.
Screen reverts to displayed parameters showing set-up file as shown below (e.g.),
• Use a combination of STORE and LOG NOW (F1) to log events as follows.
Memory Operations Datalog